Trigger information can be sent to the MP150/100 from a visual presentation system such as SuperLab, E-prime, DirectRT, MediaLab, Inquisit, and Presentation using the STP100C Isolated Digital Interface module. The…

Any signal recorded from a BIOPAC amplifier can be output through the stimulator. The stimulator Source switch must be set to CH16 (mislabeled “CH 15”) and the amplifier must be set…

We do not recommend using the pulse transducer on the same hand as the NIBP100A transducer if you are performing pulse transit time measurements. The NIBP100A will have some influence…

AcqKnowledge includes digital filters that allow you to filter a raw EEG into the following frequency bands: Delta 0.5-4Hz Theta 4-8Hz Alpha 8-13Hz Beta 13-30Hz Gamma 36-90Hz (in some older…

USB drivers for BIOPAC hardware are Microsoft certified and meet the USB communication standards at the time the hardware platform was released. Under Windows XP and above, USB drivers are broadcast…

It is possible to use LabView® with the either the MP200, MP36* or MP35 hardware. The BIOPAC Hardware API gives software developers control over the BIOPAC acquisition unit – MP200…

AcqKnowledge 3.8.2 and above for Windows allows you to synchronize video files with physiological data. This allows you to jump to specific points in either the video or data file,…

It is possible to upgrade an existing MP100 system that uses the older PCMCIA interface option. You will require one of our PLAT100W1 items, which includes software version 3.9.1 for…

MP Systems can interface with most of the major visual presentation packages by using the STP100C module. The STP100C module provides an optically isolated connection between the computer that is…

AcqKnowledge software provides a fully automated ECG analysis system. The software automatically identifies and marks the points of the ECG complex. It also calculates the amplitudes and timing intervals and…

The ECG100C amplifier has a built-in R-wave detector mode. In this mode, the amplifier outputs a peak at every R-wave, which significantly improves the quality of the signal and helps…

The UIM100C is bidirectional. With a BIOPAC amplifier connected to the UIM100C, the appropriate input becomes an output. For example, if you have an ECG100C module set to channel 1,…