Scientific Measuring Systems

Loading

Interface XLR Microphone

Interface XLR Microphone
interface specs
microphone interface

Interface XLR Microphone

$230.00

SKU: TCI115 Categories: , ,

Description

Use TCI115 to interface standard, dynamic XLR microphones to the BIOPAC DA100C for use with a Research System. The TCI115 will operate with a balanced (differential output) or unbalanced (single-ended output) XLR microphone, and accommodates a six meter XLR microphone cable. Input signal level maximum is 400 mv (p-p).  The DA100C connection permits a bandwidth from DC-5000 Hz (contact BIOPAC to discuss customization if required).

Important!

  • Do NOT connect condenser microphones to this interface—condenser-type microphones are not supported. To use a condenser mic with an MP200 System, customers should purchase a suitable analog mixer and then pipe the analog data into an unused channel on the AMI100D or UIM100C interface module.
  • The DA100C does NOT supply phantom power and phantom power should not be applied in parallel through the interface because the DA100C could be damaged by such a setup.

 

Additional information

Weight 1.0000 lbs
Dimensions 1 × 1 × 1 in

Related products