Description
Use TCI115 to interface standard, dynamic XLR microphones to the BIOPAC DA100C for use with a Research System. The TCI115 will operate with a balanced (differential output) or unbalanced (single-ended output) XLR microphone, and accommodates a six meter XLR microphone cable. Input signal level maximum is 400 mv (p-p). The DA100C connection permits a bandwidth from DC-5000 Hz (contact BIOPAC to discuss customization if required).
Important!
- Do NOT connect condenser microphones to this interface—condenser-type microphones are not supported. To use a condenser mic with an MP200 System, customers should purchase a suitable analog mixer and then pipe the analog data into an unused channel on the AMI100D or UIM100C interface module.
- The DA100C does NOT supply phantom power and phantom power should not be applied in parallel through the interface because the DA100C could be damaged by such a setup.

Ag-AgCl Electrodes
Disp. Radiotranslucent Electrode, 100/pk
Interface Cables CBL200 Series
Interface Cables
Piezo Audio Transducer
Noninvasive Cardiac Output Amplifier for MRI
EEG Caps - BioNomadix Wireless
MP200 Data Acquisition Systems
Gas Analysis System
Adhesive Tapes
VizMove Interactive Virtual Reality Systems
Interface SS2L to BSL-BBOARD
Robotic Arm Lab BME System Add-on
Tension Adjusters
Wireless Heel/Toe Strike Transducer - BioNomadix
Ethernet Cables
Tail Cuff Sensor for MRI
Electrode Gel, Isotonic, 114 g
Photoplethysmogram Transducers
Reusable Mouthpiece
BSL Robot Gripper and Servos
Heated Flow Heads
Custom Transducer Interface
Psychophys/Neuro transducer pk
Disposable Facemask
EPOCH Wireless EEG 4-Ch Sensors
Cbl Serial for MP100/MP30
VizMove Interactive Virtual Reality Systems with MP System
Laser Doppler Flow Amplifier 

