Description
The OUT102 piezo transducer is very useful for providing an audible stimulus, or alarm, when a physiological signal passes a certain threshold. As such, the OUT102 makes an excellent audible BPM indicator for ECG, blood pressure, or respiration signals. The device can also be used to indicate when temperature or other slowly moving variable (e.g., electrodermal response) passes a certain thresholld. The OUT102 is typically connected directly to the STM100C stimulator module.
The following interface cables are included with the OUT102:
- 1 x 3.5 mm cable (CBL100) for connecting the OUT102 to a Digital I/O port on the UIM100C rear panel for operation with Control Channel outputs
- 1 x Y-Splitter (CBL212) to permit the MP System to sample the drive waveform from stimulus presentation setups; permits recording of the drive waveform timing and amplitude
- 2 x Unisolated RJ11 to 3.5 mm Jack (CBL122)

General-purpose Electrodes
Goniometers & Torsiometers
Tail Cuff Sensor for MRI
Veterinary Pulse Oximeter
Dissolved O2 Probe, BTA connect
Heated Flow Heads
Gating Triggers
Disposable Bacterial Filters
Couplers
Regulator for GASCAL
STMISOLA interface for MP36/36R
EDA Electrodes (Dry)
Accelerometers - MP3X
BioNomadix Firmware Update
Ag-AgCl Reusable Snap Electrodes
Tissue Clips & Holders
Blood Pressure Cuff Transducers
Leads - RT for MRI
Force Transducers 20 g 50 g 100 g 200 g
Respiration Transducer - Wireless BioNomadix or Smart Amp
Micromanipulators
Tail Heating Units
Adhesive Tapes
Event Marking M-Pods 
