SPO2 Module with Sensor for Human MRI

Description

OXY-MRI is a stand-alone system for adult human pulse oximetry (SpO₂) in the MRI; it can also be used with a BIOPAC Research System.

The system includes an SpO₂ oximeter control unit (amplifier) and an oximeter sensor cable (SpO₂ sensor for adult human finger with two self-adhering wraps, 9 m sensor cable, and DB9 connector), plus a signal isolation adapter INISOA and interface cables to connect to an AMI100D for MP200 Systems (to use with older MP200 or MP100 Systems, contact BIOPAC to discuss connection options).

The sensor cable material is a light conducting glass bundle made up of premium achromatic glass. There is no conductive cable running through the sensor cable except what is encased in the control unit side DB9 connector. The photo detector and LED are in that end and connected to the respective fiber optic ends.

Important! Do not operate this device with the oximeter control unit or oximeter sensor connector within the MR Chamber Room. The oximeter control unit and oximeter sensor cable DB9 connector should always be positioned in the MRI Control Room with the fiber optic cable and sensor entering the MRI Chamber Room through an available waveguide.

• Place oximeter control unit and oximeter sensor cable in the MRI Control Room, then feed the oximeter sensor cable from the MRI Control Room to the MRI Chamber Room through an available waveguide. Only introduce the oximeter sensor cable and integral SpO₂ finger sensor into the MRI Chamber Room.

MRI Use: Conditional

Condition: Must use MR finger sensor and must route sensor and cable through wave guide; rated to 3.0 Tesla. (See Specifications for components.)

Additional finger sensors are available as OXY-MRI-SENSOR.

! OXY-MRI is not intended for animal use.