Description
These MRI filtered cable sets include the following components to set up recordings in the MRI:
- MECMRI-BIOP for Biopotential Amps: MECMRI-2 MRI Cable (2 m) filter to biopotential amplifier*, MRIRFIF interference filter set, and MECMRI-1 MRI Cable (8 m) chamber to filter.
- MECMRI-TRANS for Transducer Amps: MECMRI-1 MRI Cable (8 m) chamber to filter, MRIRFIF interference filter set, and MECMRI-3 MRI Cable (2 m) filter to transducer amplifier*.
- MECMRI-AMI for Amplifier Module Interface: MRIRFIF interference filter set and MECMRI-8 MRI Cable (2 m) to AMI100D amplifier or HLT100C amplifier. MECMRI-AMI replaces the older MECMRI-HLT to add AMI100D compatibility.
- MECMRI-HLT for older High Level Interface Amps: MRIRFIF interference filter set and MECMRI-6 MRI Cable (2 m) filter to HLT100C amplifier only—not compatible with AMI100D.
- MECMRI-DA for General Purpose Interface Amp: MRIRFIF interference filter set and MECMRI-5 MRI Cable (2 m) to DA100C amplifier.
- MECMRI-NICO for Noninvasive Cardiac Output Amp for MRI: 2-meter cable for control room side amp to patch panel, Patch panel Pi filter, 8-meter cable for chamber room side from patch panel to subject and all typical mounting bracket hardware to NICO100C-MRI in control room.
- MECMRI-STMISO for Stimulus Isolation Adapters: MECMRI-1 Cable (8 m) for MRI chamber room to filter, MRIRFIF interference filter set, and MECMRI-4 Cable (2 m) with DSUB9 to 2 x Touchproof for filter to STMISO in MRI control room.
Note: Accelerometers must be used with their provided cable (MECMRI-9 or MECMRI-7) and filter set (MRIRFIF) to connect with an existing AMI100D Amplifier Interface Module or HLT100C High Level Transducer module. See TSD109A-MRI Accelerometer 2 G for MRI or TSD109C2-MRI Accelerometer 5 G for MRI for setup.
IMPORTANT!
* Use with MRI Smart Amplifiers when available; MRI Smart Amps provide cleaner signals and improved performance, including in higher field strength cases.
See Safety Guidelines for recording biopotential measurements in the MRI environment.

Electrode Impedance Checker
MCE100C interface kit
Electromyogram Amplifier
Stimulating Electrodes
Lead Wires with Clip
EDA Electrodes (Dry)
Clip Leads for EL120
Micromanipulators
Adhesive Tapes
EEG Caps for CAP100C
Bar Electrodes
Tail Cuff Sensor for MRI
Ag-AgCl Electrodes
GPS Tracking Unit
Special Electrode Lead Clips
Interface Cables CBL200 Series
Paired Electrodes
Airflow Filter - Disposable Mouthpiece
Nerve Conduction Chambers
I/O Interface for TTL Inputs
Needle Electrodes - Animal/Tissue
Hydrophobic Filter 10/pk
SPO2 Pulse Oximeter Amplifier
Cloth Base Electrodes
Stress Test Electrodes
Gold-plated Cup Electrodes
LED Video Sync Cable, 3 m
Laser Doppler Probes
Electrode Gel, Isotonic, 114 g
Disposable Bacterial Filters
Electroencephalogram EEG Amplifier for MRI
EEG/ECG/EMG/EOG Prep Gel 114 g
Mixing Chambers
EEG Electroencephalogram Amplifier
Disp. RT Dry Electrode for EDA, 100/pk 


Reviews
There are no reviews yet.