SPO2 Pulse Oximeter Amplifier

  B: Pulse Plethysmogram* (Ch 5, 6, 7, or 8)

  C: Heart pulse rate (Ch 9, 10, 11, or 12)

  D: Module Status ( Ch 13, 14, 15, or 16)

These signals are directed to switchable blocks of different MP input channels. Up to four OXY100E modules can be used with a single MP System. The OXY100E has built-in calibration for a simplified setup procedure. Each OXY100E module requires one of the TSD124 series SpO₂ transducers.

* Pulse Note: The Pulse Plethysmogram output is not the raw pulse signal—the waveform is pre-conditioned using proprietary algorithms. The Pulse waveform output of the OXY100E should only be used to calculate heart rate, using the rate detector in AcqKnowledge. For a raw Pulse signal, employ the specified PPG Transducer with PPG100D Smart Amp or PPG100C Amplifier for MP200 Systems, or the SS4LA PPG Transducer for MP36R Systems.