Name: SPO2 Pulse Oximeter Amplifier
SKU: OXY100E
Availability: InStock

Description

The OXY100E measures beat-by-beat, blood oxygen saturation (SpO₂) level in a noninvasive fashion. The OXY100E outputs four signals simultaneously:

A: SpO2 value (Ch 1, 2, 3, or 4)

B: Pulse Plethysmogram* (Ch 5, 6, 7, or 8)

C: Heart pulse rate (Ch 9, 10, 11, or 12)

D: Module Status ( Ch 13, 14, 15, or 16)

These signals are directed to switchable blocks of different MP input channels. Up to four OXY100E modules can be used with a single MP System. The OXY100E has built-in calibration for a simplified setup procedure. Each OXY100E module requires one of the TSD124 series SpO₂ transducers.

* Pulse Note: The Pulse Plethysmogram output is not the raw pulse signal—the waveform is pre-conditioned using proprietary algorithms. The Pulse waveform output of the OXY100E should only be used to calculate heart rate, using the rate detector in AcqKnowledge. For a raw Pulse signal, employ the specified PPG Transducer with PPG100D Smart Amp or PPG100C Amplifier for MP200 Systems, or the SS4LA PPG Transducer for MP36R Systems.

Additional information

Weight	0.9800 lbs
Dimensions	1 × 1 × 1 in